4-inch Sewer Pipe Fittings

What Is a 4-inch Sewer Pipe Fittings?

4-inch sewer pipe fitting is a type of sanitary fitting used to connect two sections of a four-inch diameter sewer pipe.

There are many different types of 4-inch sewer pipe fittings available on the market, but they all serve the same primary purpose: to create a watertight connection between two pieces of sewer pipe.

They are made from a variety of materials, including:

  • PVC
  • ABS, and
  • Polyethylene
4-inch sewer pipe fittings

PVC

PVC is the most common type of material used for 4-inch sewer pipe fittings, as it is durable and resistant to corrosion.

ABS

ABS is also popular for 4-inch sewer pipe fittings, as it is easy to work with and install.

Polyethylene

Polyethylene is a less common choice for 4-inch sewer pipe fittings, but it is becoming more popular due to its resistance to chemicals and low price.

While there are many manufacturers of 4-inch sewer pipe fittings, they must all meet certain specifications set forth by the American Society for Testing and Materials (ASTM).

easy assembly

Different Types of 4-Inch Sewer Pipe Fittings

4-inch sewer pipe fittings are available in a wide variety of configurations, including:

  • Elbows: Used to change the direction of the pipe by 90 degrees or 45 degrees.
  • Tees: Used to split the flow of sewage in two different directions.
  • Wyes: Used to split the flow of sewage in two directions at a 45-degree angle.
  • Adapters: Used to connect pipes of different sizes or types together.
  • Couplings: Used to connect two pipes of the same size together.
  • Caps: Used to close the end of a pipe.
  • Plugs: Used to block the flow of sewage in a pipe.
  • Crosses: Four-way fittings used to connect four pipes together at 90-degree angles.
  • Bends: used to change the direction of the pipe gradually
  • Reducers: Used to connect pipes of different sizes together and reduce the flow to the smaller pipe size.

These fittings typically come in PVC or ABS and can be connected to the pipe using a solvent cement.

Contact Pipe Xpress at 610-918-7120 or visit our website to check our product and stock availability.


Various Applications of 4-Inch Sewer Pipe Fittings

PVC, or polyvinyl chloride, is a versatile material for many applications.

PVC sewer pipe fittings are no exception. PVC sewer fittings are often used in a variety of underground applications.

Connecting two pipes

One everyday use for 4-inch sewer pipe fittings is to connect two pieces of PVC pipe in a horizontal line to maintain flow without clogging.

This can be done in a straight line or at an angle, depending on the project’s needs. PVC sewer pipe fittings can also be used to connect PVC pipe to other materials, such as metal or concrete.

Use to create custom drainage solutions.

PVC sewer pipe fittings are also commonly used to create custom drainage solutions.

By connecting multiple fittings, it is possible to create a custom pipe system tailored to the project’s needs.

This can be an effective way to solve drainage problems in difficult or hard-to-reach areas.

Decorative purposes

Various colors and styles are available, so it is easy to find fittings that match the existing décor. PVC sewer pipe fittings can also be painted if desired.

4-inch sewer pipe fittings are a versatile and affordable option for various applications.

How To Use 4-inch Sewer Pipe Fittings?

4-inch sewer pipe fittings are commonly used to connect two pieces of 4-inch sewer pipe.

You can make a few different types of connections. But it will depend on the type of fitting that is being used.

Slip joint

The most common type of connection is a slip joint, simply slipping the two ends of the pipe into the fitting and then tightening the connection with a wrench.

However, this type of connection could be stronger and is not recommended for use in areas with a lot of stress on the pipes.

Hub connection

This type of connection is made by inserting the end of one pipe into the fitting and then welding the two pieces together.

This type of connection is much stronger than a slip joint. It is often used in areas with a lot of stress on the pipes.

Compression joint

This type of connection is made by inserting the end of one pipe into the fitting and then compressing the two pieces together with a compression coupling.

This type of connection is even stronger than a hub connection. It is often used in areas with a lot of stress on the pipes.

No matter the type of connection you need, 4-inch sewer pipe fittings are a great way to connect two pieces of sewer pipe.

Just make sure you choose the right type of fit for the job and follow the instructions carefully to avoid any problems.

tees

Some Applications For The 4-Inch Sewer Pipe Fittings

  • Connecting two sewer pipes
  • Joining a sewer pipe to a manhole
  • Creating an access point for maintenance or cleaning
  • Repairing a damaged sewer pipe
  • Connecting a sewer pipe to a drain or trap

Why You Should Choose The 4-Inch Sewer Pipe Fittings?

It would help if you chose the 4-inch sewer pipe fittings for many reasons.

  • They are very durable and last long.
  • They are also resistant to corrosion and rust, which means they will not break down easily.
  • Additionally, the 4-inch sewer pipe fittings are easy to install and require little maintenance.
  • They are relatively inexpensive, which makes them an excellent option for many homeowners.

Looking For 4-Inch Sewer Pipe Fittings – Choose Pipe Xpress

We have a wide selection of 4-inch sewer pipe fittings to choose from.

  • Our fittings are made from durable materials that withstand everyday use’s wear and tear.
  • Plus, our fittings are easy to install, so you can get your project up and running in no time.
  • With our competitive prices and fast shipping, you can be sure you’re getting the best deal on 4-inch sewer pipe fittings online.
  • We offer free returns on all orders, so you can be confident that you’re making the right purchase.

Order your 4-inch sewer pipe fittings today by calling Pipe Xpress at 610-918-7120.