PVC Pipe Valves
What Are Pvc Pipe Valves, and What Do They Do?
PVC Pipe Valves are important components that allow water, air, or any other material to flow through PVC pipe systems and control the pressure and direction of the flow.
They enable us to transport water, gases, and even hazardous chemicals with more excellent safety and efficiency than ever before.
They are usually placed strategically in the piping system where the flow needs to be controlled or redirected.
For example, a valve might turn a faucet on or off. Or to divert water from one pipe to another.
The Different Types Of Pvc Pipe Valves Available On The Market Today
There are different types of valves used in PVC pipes, such as ball valves, butterfly valves, gate valves, and check valves. Each type of valve performs a different purpose in the system.
The valve type for a pipeline is important to secure the water flow and the pipe’s effectiveness.
PVC Ball valves
PVC Ball Valve is used to control the flow of liquid or gas through a pipe with little effort. The opening and closing functions turn a handle that lifts or pushes down on the ball inside the valve.
PVC Butterfly valves
A butterfly Valve regulates moderate liquids, gases, and steam flow with a simple turning motion.
They use a disc connected to an outer stem that acts as a lever for opening and closing the valve.
PVC Gate valves
Gate Valves are used in high-pressure systems as they can completely shut off fluid or gas flow when operated.
You can use them for regulating pressure in pipelines, but they are not suitable for frequent operation as this may cause damage to the valve seat.
PVC Check valve
Check Valves are designed to allow flow in only one direction and prevent backflow.
You can achieve this by using a spring-loaded disc that is pushed open by the flow of liquid or gas and closes when the pressure in the opposite direction is too high.
Diaphragm valve
A diaphragm valve is a little less common than many other options on our list. These valves also serve a particular purpose.
A diaphragm valve is a regulatory valve that is used to control pressure.
Overall, PVC plumbing valves and PVC fittings are essential components that allow us to:
- Control and regulate the pressure
- Direction and even temperature of liquids
- Gases and
- Other material through our PVC pipes
With them, efficient transport is possible.
How Valves Work?
Valves are mechanical devices that control or regulate fluid flow by opening, closing, or partially obstructing a passageway.
They are classified according to how they operate.
Why Use Them?
You might want/need to use PVC valves for many reasons.
- Perhaps you need to control the direction of flow or want to be able to turn the flow off quickly.
- You may need to regulate the pressure or keep harmful substances from flowing back into your water supply.
Whatever your reason for needing them, PVC valves can help!
How To Choose The Right Pvc Pipe Valve For Your Needs?
When it comes to plumbing, choosing the correct PVC pipe valve for your needs can be daunting.
Many different types of valves are available on the market today, and each has unique features that make it suitable for various applications.
First, you need to consider the type of valve you will need
The most common PVC pipe valves are globe and gate valves. It is important to consider the valve’s expected flow rate and pressure rating when choosing a valve.
Materials used for the valve body
The next factor to consider is the material used for the valve body.
- PVC valves are most commonly made from either chlorinated polyvinyl chloride (CPVC) or unplasticized polyvinyl chloride (uPVC).
- CPVC has higher temperature resistance and is generally used in higher-pressure applications.
- While uPVC has a lower cost but may not be suitable for high-pressure applications.
Design of the valve
Finally, consider the design of the valve itself. There are PVC pipe valves that are designed with the following:
- Welded connections
- Threaded connections or
- Flanged connections depending on your specific needs.
Each type of connection has its advantages and disadvantages, so it is important to research each option before deciding.
How To Install A Pvc Pipe Valve?
Installing a PVC pipe valve is an important step for many plumbing projects. The process isn’t complicated and only takes about 10 minutes to complete.
Shut off the water supply that will be connected to the PVC pipe
This is done by turning off the main water valve near the water meter.
Place the PVC pipe valve on the end of the pipe where it will be connected
Make sure you have a good seal by using a special glue designed for PVC pipes and fittings.
Apply an even glue coating to both surfaces, then connect them and twist until the valve is secured.
Open the valve to allow water to flow through it, then turn on the main water supply
This will ensure that any air bubbles or debris that may have been trapped in the pipe are released. They don’t interfere with the proper operation of the valve.
Tighten the valve as needed
Use an adjustable wrench to ensure it is properly secured and doesn’t leak.
Inspect the pipe for any signs of damage or leaks
Then turn off the main water supply again. You’re now ready to use your new PVC pipe valve!
Once you’ve installed your PVC pipe valve, you’ll need to inspect it to ensure it’s still working properly regularly.
Are you looking for a new valve for your piping system?
PVC pipe valves are some of the market’s most versatile and reliable valves. They’re perfect for residential and commercial applications, and they come in various sizes and styles to suit your needs.
You can find the perfect PVC pipe valve for any application, whether you need a ball valve, check valve, or gate valve.
And because PVC is such a popular material, you can be sure that these valves will be available at a price you can afford.
At Pipe Xpress, we ensure you can find the best pipes for your needs.
You can call us at 610-918-7120 if you have further queries. Purchase your PVC pipe valves today on our website!